(1)電子板尺寸:最大限度為:457*356mm最小限度為: 80*50mm
(2)零件:Tape,stick feeder:最大限度為.74 slots Tray: 10types
(3)貼裝速度:最快射擊速度為0.7sec/shot(使用4種不同吸咀) 4.0sec/shot(tray component)注意:零件形狀會影響設置速度
(4)精確度:+/-0.05 mm for 4-sided parts with at least 48 leads +/-0.1mm for other parts
(5)設備處理器:F4G & MCS30 & FLEXA
(6)電源: 3-phase,200 to 480 VAC,3.0KVA
(7)空氣消耗量:0.5 Mpa(5kgf/cm2),60NI/min
(90 NI/5sec during tray discharge)
(8)機器製造尺寸:
長: 2,940mm (extra 374 mm with MTU)
寬: 1,644mm (including fencings)
高: 1,725mm (excluding signal tower)
(9)重量:約3500kg
With MTU:大約4,250kg |
|
|
|
| 選擇圖片 |
 |
|
|
|
|
